P156 Jiancheng Hao and Kai Tang, Efficient cutting path
planning for a non-spherical tool based on an iso-scallop height distance field,
Chinese Journal of Aeronautics, accepted, Nov. 2023.
P155 Zhaoyu Li and Kai Tang, Efficient five-axis
scanning-inspection path planning for complex freeform surfaces, Journal
of Robotics and Computer-Integrated Manufacturing, Volume 86, April 2024,
102687.
P154 Xiangyu Li, Junxue Ren, and Kai Tang,
Efficient machining of a
complex blisk channel using a disc cutter, Chinese Journal of Aeronautics,
Volume 37 (1), Jan. 2024, pp. 414-437.
P153 Tak Yu Lau and Kai Tang, Partition-based print sequence
planning and adaptive slicing for scalar field-based multi-axis additive
manufacturing, Journal of Computer-Aided Design, Vol. 163, Oct.
2023.
P152 Danjie Bi, Molong Duan, Tak Yu Lau, Fubao
Xie, and Kai Tang, Strength-enhanced volume
decomposition for multi-directional additive manufacturing,
Journal of Additive Manufacturing, Vol. 69, May 2023, 103529.
P151 Zhao ZHANG, Feng JIANG, Ming LUO, Baohai
WU, Dinghua ZHANG, and Kai Tang, Geometric error measuring,
modeling, and compensation for CNC machine tools: A review, Chinese
Journal of Aeronautics, accepted, Mar. 2023.
P150 Dong He and Kai Tang, Collision-conscious multi-pass
flank milling of complicated parts based on stripification, Journal of
Computer-Aided Design, Vol. 157, Apr. 2023.
P149 Joseph Jayakody and Kai Tang, Convexity and Surface Quality
Enhanced Curved Slicing for Support-Free Multi-Axis Fabrication, Journal
of Manufacturing and Materials Processing, 2023, 7(1), 9.
P148 Xiaoke Deng and Kai Tang, A new visual-guided and
partition-based multi-setup 3D printing system, Journal of
Manufacturing Systems, Vol. 67, pages 35-56, April 2023.
P147 Jiancheng Hao and Kai Tang, Partition-based five-axis tool path
generation for freeform surface machining using a non-spherical tool, Journal
of Computational Design and Engineering, Vol. 9(5), Pages 15851601,
October 2022.
P146 Haonan Guo, Yingguang Li, Changqing Liu,Yang Ni, and Kai
Tang, A Deformation
Force Monitoring Method for Aero-Engine Casing Machining Based on Deep
Autoregressive Network and Kalman Filter, Journal of Applied Sciences,
12(14), 7014, July. 2022.
P145 Xinxin
Lu, Yuansheng Zhou, Dong He, Fangyan Zheng, Kai Tang, and Jinyuan Tang,
A novel
two-variable optimization algorithm of TCA for the design of face gear drives,
Journal of Mechanism and Machine Theory, Vol. 175, Sept. 2022.
P144 Yamin
Li, Dong He, Shangqin, Kai Tang, and Jihong Zhou, "Vector field-based curved
layer slicing and path planning for multi-axis printing", Journal
of Robotics and Computer-Integrated Manufacturing, Vol. 77, Oct. 2022.
P143 Zhauyu Li, Pengcheng Hu, and Kai
Tang, "Five-axis trochoidal sweep scan path planning for
free-form surface inspection", IEEE
Transactions on Automation Science and Engineering, Vol. 20(2),
April 2023 (first published online in Feb. 2022).
P142 Fubao
Xie and Kai Tang, Volume
Decomposition for Multi-axis Support-free and Gouging-free Printing based on
Ellipsoidal Slicing, Computer-Aided Design, Vol. 143, Feb. 2022.
P141 Shenghui
Wang, Yuansheng Zhou, Jinyuan Tang, and Kai Tang, "Digital tooth
contact analysis of face gear drives with an accurate measurement model offace
gear tooth surface inspected by CMMs", Journal of Mechanism and
Machines Theory, Vol. 167, Jan., 2022.
P140 Zhaoyu
Li and Kai Tang, "Kinematics-based five-axis trochoidal
milling process planning for deep and curved slots", ASME Journal
of Manufacturing Science and Engineering, Vol. 144 (2), Feb. 2022.
P139 G.Urbikain
Pelayo, D.Olvera-Trejo, M.Luo, K.Tang, L.N.Lσpez de Lacalle,
A.Elνas-Zuρig, A
model-based sustainable productivity concept for the best decision-making in
rough milling operations, Journal of Measurement, Vol. 186, Dec. 2021.
P138 Danjie
Bi, Fubao Xie, and Kai Tang, "Generation of Efficient
Iso-planar Printing Path for Multi-axis FDM Printing", Journal of
Manufacturing and Materials Processing, 5(2), 59, 2021.
P137 Zhaoyu
Li, Qianhang Yan, and Kai Tang, "Multi-pass adaptive tool
path generation for flank milling of thin-walled workpieces based on the
deflection constraints", Vol 68, Part A, Journal of
Manufacturing Processes, pp. 690-705, Aug. 2021.
P136 Dong
He and Kai Tang, "Quasi-developable and signed
multi-strip approximation of a surface mesh for efficient flank milling",
Computer-Aided Design, Vol. 140 (special issue of 2021 Solid and Physical
Modeling Conference), Nov. 2021.
P135 Xiangyu
Li, Junxue Ren, and Kai Tang, "Collaborative optimization
of conical cutter sequence for efficient multi-axis machining of deep curved
cavities", Journal of Manufacturing Processes, Vol. 66, pp
407-423, June 2021.
P134 Yamin
Li and Kai Tang, "Multi-axis support-free
printing of freeform parts with lattice infill structures", Journal
of Computer-Aided Design, Vol. 133, April 2021.
P133 Zhaoyu
Li and Kai Tang, "Partition-based five-axis toolpath
generation for freeform surface machining using a non-spherical tool",
Journal of Manufacturing Systems, Vol. 58, Part A, pp. 248-262, Jan.
2021.
P132 Zhaoyu
Li and Kai Tang, "A variable-depth multi-layer
five-axis trochoidal milling method for machining deep freeform 3D slots",
Journal of Robotics and Computer-Integrated Manufacturing, Vol. 68,
April 2021.
P131 Yao-an
Lu and Kai Tang, "Collision-free and smooth
joint motion planning for six-axis industrial robots by redundancy optimization",
Journal of Robotics and Computer-Integrated Manufacturing, Vol. 68,
April 2021.
P130 Dong
He and Kai Tang, "Geodesic distance field-based process
planning for five-axis machining of complicated parts", ASME
Journal of Manufacturing Science and Engineering, Vol. 143(6), June 2021.
P129 Zhongxi
Zhang, Ming Luo, Kai Tang, and Dinghua Zhang, "A new in-process method for
reducing the residual stresses induced deformation of thin-walled parts",
Journal of Manufacturing Processes, Vol.59,pp. 316-325, Nov. 2020.
P128 Fubao
Xie and Kai Tang, "A
potential field based multi-axis printing path generation algorithm", International
Journal of Computer Integrated Manufacturing, Vol. 33 (12), pp. 1277-1299,
2020.
P127 X.
Wang and Kai Tang, "A skeleton-based process
planning framework for support-free 3+2-axis printing of multi-branch freeform
parts", Journal of Advanced Manufacturing Technology, Vol.
110, Aug. 2020.
P126 X.
Hao, Y. Li, C. Liu, and Kai Tang, "An allowance allocation method
based on dynamic approximation via online inspection data for deformation
control of structured parts", Chinese Journal of Aeronautics, Vol.
33(12), pp. 3495-3508, Dec. 2020.
P125 Jingting
Xu, Longkun Xu, Zhen Geng, Yuwen Sun, and Kai Tang, "3D surface topography
simulation and experiments for ball-end CNC milling considering dynamic
feedrate", CIRP Journal of Manufacturing Science and Technology, Vol.
31, pp. 210-223, Nov. 2020.
P124 Jiarui
Wang, Lulin Quan, and Kai Tang, "A prediction method based on
the voxel model and the finite cell method for cutting force-induced
deformation in five-axis milling process", Journal of Computer
Methods in Applied Mechanics and Engineering, Vol. 367, Aug. 2020.
P123 Lufeng
Chen, Pengcheng Hu, Rong Zhang, Zhaoyu Li, and Kai Tang,
"A spiral-based
inspection path generation algorithm for efficient five-axis sweep scanning of
freeform surfaces", Journal of Computer-Aided Design, Vol.
124, Jul.2020.
P122 Fubao
Xie and Kai Tang, "Path smoothing and feed rate
planning for robotic curved layer additive manufacturing", Journal
of Robotics and Computer-Integrated Manufacturing, Vol. 65, Oct.2020.
P121 Yamin
Li and Kai Tang, "A new voxel model based
process-planning method for five-axis machining of complicated parts",
ASME Journal of Computing and Information Science in Engineering, Vol.
20 (4), Aug.2020.
P120 X.
Hao, Y. Li, Y. Cheng, C. Liu, K. Xu, and Kai Tang, "A time-varying geometric
modeling method for parts with deformation during machining process", Journal
of Manufacturing Systems, Vol. 55,pp. 15-29, Apr.2020.
P119 Zhaoyu
Li, Lufeng Chen, Ke Xu, and Kai Tang, "Five-axis trochoidal flank
milling of deep 3D cavities", Journal of Computer-Aided Design, Vol.
119, Feb. 2020.
P118 Li
Chen and Kai Tang, "Manufacturability
and process planning for additive and subtractive hybrid manufacturing of
quasi-rotational parts with columnar features", Journal of
Computer-Aided Design, Vol. 118, Jan. 2020.
P117 Yamin
Li, Long Zeng, and Kai Tang, "Orientation-point
relation based inspection path planning method for 5-axis OMI system",
Journal of Robotics and Computer Integrated Manufacturing, Vol. 61,
Feb. 2020.
P116 Qi
Wang, Dinghua Zhang, and Kai Tang, "Energy
consumption model for milling process considering auxiliary load loss and its
applications", International Journal of Advanced Manufacturing
Technology, Vol. 105(10), pp. 4309 - 4323, Dec. 2019.
P115 Xiangyu
Li, Junxue Ren, and Kai Tang, "A
tracking-based numerical algorithm for efficiently constructing the feasible
space of tool axis of a conical ball-end cutter in five-axis machining",
Journal of Computer-Aided Design, Vol. 117, Dec.2019.
P114 Yamin
Li, Hongrui Cao, and Kai Tang, "A
general dynamic model coupled with EFEM and DBM of rolling bearing-rotor system",
Journal of Mechanical Systems and Signal Processing, Vol. 134, Dec.
2019.
P113 Yamin
Li, Long Zeng, and Kai Tang, "A dynamic pre-travel
error prediction model for the kinematic touch probe", Journal of
Measurement, Vol. 146, pp. 689-704, Nov., 2019.
P112 Qi
Wang, Dinghua Zhang, and Kai Tang, "A
mechanics based prediction model for tool wear and power consumption in
drilling operations and its applications", Journal of Cleaner
Production, Vol. 234, pp. 171-184, Oct. 2019.
P111 Ke
Xu, Yingguang Li, Lufeng Chen, and Kai Tang, "Curved
layer based process planning for multi-axis volume printing of freeform parts",
Journal of Computer-Aided Design, Vol. 114, pp. 51-63, Sept. 2019.
P110 Zhaoyu
Li and Kai Tang, "A new
trochoidal pattern for slotting operation", International Journal
of Advanced Manufacturing Technology, Vol. 102, No. 5-8, pp. 1153-1163,
June 2019.
P109 Ke
Xu, Baohai Wu, Zhaoyu Li, and Kai Tang, "Time-efficient
trochoidal tool path generation for milling arbitrary curved slots", ASME
Journal of Manufacturing Science and Engineering, Vol. 141(3), Jan. 2019.
P108 Ke
Xu, Lufeng Chen, and Kai Tang, "Support-free Layered
Process Planning towards 3+2-axis Additive Manufacturing", IEEE
Transactions on Automation Science and Engineering, Vol. 16 (2), pp.
838-850, April 2019.
P107 Jiarui
Wang, Ming Luo, Ke Xu, and Kai Tang, "Generation
of tool-life-prolonging and chatter-avoidance efficient tool path for five-axis
milling of freeform surfaces", ASME Journal of Manufacturing
Science and Engineering, Vol. 141(3), Jan. 2019.
P106 Lufeng
Chen and Kai Tang, "Variable-depth
curved layer fused deposition modeling of thin-shells", Journal of
Robotics and Computer Integrated Manufacturing, Vol. 57, pp. 422-434, June
2019.
P105 Xiangyu
Li, Junxue Ren, and Kai Tang, "Optimization
of cutter profile for achieving maximum stiffness in five-axis milling of deep
and narrow channel parts", Journal of Manufacturing Processes, Vol.
37, pp. 541 - 555, Jan. 2019.
P104 Yang
Zhang and Kai Tang, "Automatic sweep scan path
planning for five-axis free-form surface inspection based on hybrid swept-are
potential field", IEEE Transactions on Automation Science and
Engineering, Vol. 16(1), pp. 261-277, Jan. 2019.
P103 Pengcheng
Hu, Jihong Cheng, Kai Tang, "Spiral
curve-based efficient five-axis sweep scanning of barrel-shape surfaces", ASME Journal
of Manufacturing Science and Engineering, Vol.140,
pp. 071001-1 - 071001-16, July 2018.
P102 Qianhang
Yan, Ming Luo, and Kai Tang, "Multi-axis
variable depth-of-cut machining of thin-walled workpieces based on the
workpiece deflection constraint", Computer-Aided
Design, Vol. 100, pp.14-29, July 2018.
P101 Lufeng
Chen, Ming Luo, Pengcheng Hu, and Kai
Tang, "Optimal
interface surface determination for multi-axis freeform surface machining with
both roughing and finishing", Chinese Journal of Aeronautics,
Vol. 31(2), pp.370-384, Feb. 2018.
P100 Lufeng
Chen, Yingguang Li, and Kai Tang, "Variable-depth
multi-pass tool path generation on mesh surfaces",
International Journal of Advanced Manufacturing Technology, Vol. 95, pp.
2169-2183, Feb. 2018.
P99 Pengcheng Hu, Huicheng Zhou, Jihong Cheng, Chenhan Lee, Kai
Tang, "Automatic
generation of efficient and interference-free five-axis scanning path for
free-form surface inspection", Computer-Aided
Design, Vol.98, pp. 24-38, May 2018.
P98 Baohai
Wu, Mancang Liang, Ying Zhang, Ming Luo, and Kai Tang, "Optimization
of machining strip width using effective cutting shape of flat-end-cutter for
five-axis free-form surface machining", International Journal of
Advanced Manufacturing Technology, Vol. 94, Issues 5-8, pp. 2623-2633,
Feb. 2018.
P97 Ming
Luo and Kai Tang,
"Improving
tool life in multi-axis milling of Ni-based superalloy with ball-end cutter
based on the active cutting edge shift strategy", Journal
of Materials Processing Technology,
Vol. 252, pp. 105-115, Feb. 2018.
P96 Yang
Zhang, Zi Zhou, and Kai Tang, "Sweep
scan path planning for five-axis inspection of free-form surfaces", Journal
of Robotics and Computer Integrated Manufacturing, Vol. 49, pp. 335-348,
Feb. 2018.
P95 Li
Chen, Ke Xu, and Kai Tang, "Optimal
sequence planning for multi-axis hybrid machining of complex geometries",
Computer and Graphics (special issue of CAD/Graphics 2017), Vol. 70,
pp. 176-187, Feb. 2018.
P94 Lulin
Quan, Yang Zhang, and Kai Tang,
"Curved reflection
symmetric axes on free-form surfaces and their extraction", IEEE Transactions on Automation Science and
Engineering, Vol. 15(1), pp. 111-126, Jan. 2018.
P93 Xun
Li, Ming Chen, and Kai Tang, "A simple and
automatic method for locating surgical guide hole", Journal
of 3D Research, Sept.
2017.
P92 Ke
Xu, CH Chu, and Kai Tang, "Cutting
force and machine kinematics constrained cutter location planning for five-axis
flanking milling of ruled surfaces", Journal of Computational
Design and Engineering, Vol. 4(3), pp. 203-217,July 2017.
P91 Pengcheng
Hu, Lufeng Chen, and Kai Tang,
"Efficiency-optimal
iso planar tool path generation for five-axis machining of freeform surfaces",
Computer-Aided Design, Vol. 83, pp. 33-50, Feb. 2017.
P90 Pengcheng
Hu, Rong Zhang, and Kai Tang, "Automatic generation of
five-axis continuous inspection paths for free-form surfaces", IEEE Transactions on Automation Science and
Engineering, Vol. 14, No. 1, pp. 83-97, Jan. 2017.
P89 Ke
Xu and Kai Tang, Optimal
workpiece setup for time-efficient and energy-saving five-axis machining of
freeform surfaces, ASME Journal of Manufacturing Science and
Engineering, Vol. 139(5), pp. 051003-1
- 051003-16, May 2017.
P88 Xiaoyun
Yuan and Kai Tang, "Rectified unstructured
T-splines with dynamic weighted refinement for improvement in geometric
consistency and approximation convergence", Computer Methods in Applied Mechanics and Engineering, Vol. 316,
pp. 373-399, April 2017.
P87 B.
Wu, D. Cui, X. He, D. Zhang, and Kai Tang, "Cutting
tool temperature prediction method using analytical model for end milling",
Chinese Journal of Aeronautics, Vol. 29(6), pp.
1788-1794, 2016.
P86 Ke
Xu, Ming Luo, and Kai Tang, "Machine
based energy-saving tool path generation for five-axis end milling of freeform
surfaces", Journal of Cleaner Production, Vol. 139, pp.
1207-1223, 15 Dec. 2016.
P85 X.
Liu, N. Xie, Kai Tang, and J. Jia,
"Lightweighting
for Web3D Visualization of Large-scale BIM Scenes in Real-time", Graphical
Models, Special Issue on Advances in Web3D, Vol. 88, pp. 40-56, Nov. 2016.
P84 Zi
Zhou, Yang Zhang, and Kai Tang, Sweep
scan path planning for efficient freeform surface inspection on 5-axis CMM,
Computer-Aided Design, Vol. 77, pp. 1-17,Aug., 2016.
P83 Yong-Jin
Liu, Cheng-Chi Yu, Min-Jing Yu, Kai Tang, and Deok-SooKim, A Robust
Divide and Conquer Algorithm for Progressive Medial Axes of Planar Shapes, IEEE Trans.
on Visualization and Computer Graphics, Vol. 22, No. 12, pp. 2522-2536, 2016.
P82 Tsz-Ho
Kwok and Kai Tang, Improvements
to the ICP algorithm for shape registration in manufacturing, ASME
Journal of Manufacturing Science and Engineering, Vol. 138, pp. 011014-1 to 011014-7, Jan. 2016.
P81 Ke
Zhang and Kai Tang, Optimal
five-axis tool path generation algorithm based on double scalar fields for
freeform surfaces, International Journal of Advanced Manufacturing
Technology, Vol.83, No. 9, pp.
1503-1514, Apr. 2016.
P80 Pengcheng
Hu and Kai Tang, Five-axis
tool path generation based on machine-dependent potential field, International
Journal of Computer Integrated Manufacturing, Vol.
29, No. 6, pp. 636-651, 2016.
P79 Tsz-HoKwok,
Yan-qiu Zhang, Charlie CL Wang, Yong-jin Liu, andKai Tang, Styling
evolution for tight fitting garments, IEEE Trans. on Visualization and
Computer Graphics, Vol. 22, No.
5, pp. 1580-1591, May 2016.
P78 Ke
Xu and Kai Tang, An
energy saving approach for rough milling tool path planning, Journal
of Computer-Aided Design and Applications, Vol. 13, No. 2, Aug. 2015.
P77 M.
Chen, H. Yu,Kai Tang, and A. Joneja, Interpolating
curved grids using quasi-developable bi-cubic Gregory patches, Computer-Aided
Design and Applications, Vol. 12 (5), pp.564-571, March 2015.
P76 Rong
Zhang, Pengcheng Hu, and Kai Tang, Five-axis
finishing tool path generation for a mesh blade based on linear morphing cone,
Journal of Computational Design and Engineering, Vol. 2, No. 4, pp.
268-275, Oct. 2015.
P75 Li
Chen, Ke Xu, and Kai Tang, Collision-free
tool orientation optimization in 5-axis machining of bladed blisk, Journal
of Computational Design and Engineering,
Vol. 2, No. 4, pp. 167-205, Oct. 2015.
P74 X. Wei, Ajay Joneja, and Kai Tang, An
improved algorithm for the automated design of large-scaled robot skin, IEEE Transactions on Automation Science and
Engineering, Vol. 12, No. 1, pp. 372-377, Jan. 2015.
P73 Lulin Quan and Kai Tang,
Polynomial
local shape descriptor on interest points for 3D part-in-whole matching,
Computer-Aided Design, Vol. 59,
pp. 119-139, Feb. 2015.
P72
Wen-yong Gong, Yong-jin Liu, Kai Tang, and Tie-ru Wu,
Approximate
Delaunay mesh reconstruction and quality estimation from point samples,
Journal of Computational and Applied
Mathematics, Vol. 274, pp. 23-34, Jan. 2015.
P71 Ke Xu and Kai Tang, Five-axis
tool path and feedrate optimization based on the cutting force-area quotient
potential field, International Journal of Advanced Manufacturing
Technology, Vol.
75, Issue 9-12, pp. 1661-1679 December 2014.
P70
K. Zhang and Kai Tang,
An efficient
greedy strategy for five-axis tool path generation on dense triangular mesh,
International Journal of Advanced Manufacturing Technology, Vol. 74, Issue 9-12, pp. 1539-1550,
Oct., 2014.
P69 Ming
Chen, Xun Li, and Kai Tang, Optimal
air-move path generation based on MMAS algorithm, International Journal of Production Research, Vol. 52, Issue 24,
pp. 7310-7323, 2014.
P68 Wen-yong Gong,Yong-jin Liu, Kai
Tang, and Tie-ru
Wu, Variational
discrete developable surface interpolation", ASME Journal of Computing and Information
Science in Engineering, 14(2), Feb., 2014.
P67 Ming Chen and Kai Tang, G2 Quasi-developable Bezier
Surface Interpolation of Two Space Curves, Computer-Aided Design, Vol. 45, No. 11, pp. 1365-1377, 2013.
P66 Pengcheng Hu, Kai Tang, and Chen-Han Lee, Global obstacle avoidance and
minimum workpiece setups in five-axis machining, Computer-Aided Design, Vol. 45, No. 10,
pp. 1222-1237, 2013.
P65 Ming
Chen and Kai Tang, Quasi-developable Surface
Modeling of Contours with Curved Triangular Patches, Computers
& Graphics, Vol. 37, No. 7, pp. 851 - 861, 2013.
P64 Yong-Jin
Liu and K. Tang, "The complexity of geodesic
Voronoi diagrams on triangulated 2-manifold surfaces", Information
Processing Letter, Information
Processing Letter, 113(4): 132-136, 2013.
P63 Z.
Chen, Kai Tang, Ajay Joneja, Fast
and Automatic Identification of Contours for Girth Measurement on 3D Human
Models with Variant Postures, Computer-Aided
Design and Applications, Vol. 10(2), 2013.
P62 Pengcheng
Hu and K. Tang, "Improving the dynamics of
five-axis machining through optimization of workpiece setup and tool
orientations", Computer-Aided Design, Vol. 43, No. 12,
pp. 1693-1706, 2011.
P61 Yong-Jin
Liu, K. Tang, Wen-Yong Gong and Tie-Ru Wu,
"Industrial
Design using Interpolatory Discrete Developable Surfaces", Computer-Aided
Design, Vol. 43, No. 9, pp. 1089-1098, 2011.
P60 Yong-Jin
Liu, Z. Chen, and K. Tang, "Construction of Iso-contours,
Bisectors and Voronoi Diagrams on Triangulated Surfaces", IEEE
Transactions on Pattern Analysis and Machine Intelligence, Vol. 33, No. 8,
pp. 1502-1517, Aug., 2011.
P59 Ming Chen and K. Tang, "A Fully Geometric Approach for Developable Cloth
Deformation", The Visual Computer, Vol. 26, No. 6-8, pp.
853-863, June 2010 (special issue of Computer Graphics International
Conference, June 8-11, 2010, Singapore).
P58
Yong-Jin Liu, Wen-Qi Zhang,
and K. Tang, "Some Notes on Maximal Arc
Intersection of Spherical Polygons: Its NP-Hardness and Approximation
Algorithms", The Visual Computer, Vol. 26, No. 4, pp.
287-292, 2010.
P57
Z. Chen and K. Tang,
"3D Shape Classification Based
on Spectral Function and MDS Mapping", ASME Journal of
Computing and Information Science in Engineering, Vol. 10, No. 1, 2010.
P56
Charlie Wang and K. Tang,
"Pattern Computation for
Compression Garment by a Physical/Geometric Approach", Computer-Aided
Design, Vol 42, No. 2, pp 78-86, 2010.
P55
K. Tang and M. Chen,
"Quasi-developable mesh surface
interpolation via mesh deformation", IEEE Trans. on
Visualization and Computer Graphics, Vol. 15, No. 3, pp. 518-528, 2009.
P54 H. Wang and K. Tang, "Biorthogonal Wavelet
Construction for Hybrid Quad/Triangle Meshes", The Visual
Computer, 25(4), pp. 349-366, April 2009.
P53 Nan Wang and K. Tang, "Five-axis tool path generation
for a flat-end tool based on iso-conic partitioning", Computer-Aided
Design, Vol. 40, Dec., pp. 1067-1079, 2008.
P52 K. Chen and K. Tang, "Interactive Haptic Refinement
of a 5-axis Finishing Cut", ASME Journal of Computing
and Information Science in Engineering, V(8), N(4), December, 2008.
P51 H.
Wang, K. Tang, and K. Qin, "Biorthogonal Wavelets Based on
Gradual Subdivision of Quadrilateral Meshes", Computer-Aided
Geometric Design, Vol. 25, No. 9, pp. 816-836, 2008.
P50 Nan Wang and K. Tang, "Automatic Generation of
Gouge-free and Angular-velocity-compliant 5-axis Toolpath",
Computer-Aided Design, Vol. 39, No. 10, pp. 841-852, 2007.
P49 Yong-jin Liu, K. Tang, and Ajay
Joneja, "Modeling Dynamic Developable
Meshes by Hamilton Principle", Computer-Aided Design,
Vol. 39, No. 9, pp. 719-731, 2007.
P48 Hongwei Lin, K. Tang, Ajay Joneja,
and Hujun Bao, "Generating strictly
non-self-overlapping structured quadrilateral grid", Computer-Aided
Design, Vol. 39, No. 9, pp. 709-718, 2007.
P47 Charlie Wang and K. Tang, Woven model based geometric
design of elastic medical braces, Computer-Aided Design,
Vol. 39, No. 1, pp. 67-69, 2007.
P46 H. Wang, K.H. Qin, K. Tang, "Efficient wavelet construction
with Catmull-Clark subdivision", The Visual Computer,
Vol. 22, pp. 874-884, 2006 (special issue of Pacific Graphics 2006).
P45 K. Tang and Yong-jin Liu, "Dynamic medial axes of planar
shapes", Lecture Notes in Computer Science, Vol.
4503, pp. 460 - 468, 2006.
P44 Kun Chen and K. Tang, "Reliable
haptic system for collision-free 5-axis toolpath generation", Computer-Aided
Design & Applications, Vol. 3, No. 5, pp. 629-638, 2006.
P43 Yong-jin Liu, K. Tang, and Ajay
Joneja, "An efficient implementation of
RBF-based progressive point-sampled geometry", Lecture
Notes in Computer Science, Vol. 4077, pp. 637-642, 2006.
P42 Jinyuan Jia, Ajay Joneja, and K. Tang,
"New decomposition scheme of canal surfaces for planar sections
computing", Computer-Aided Design & Applications, Vol. 3, No.
1-4, pp. 349-358, 2006.
P41 Jinyuan Jia, Ajay Joneja, and K. Tang,
"Robustly computing
intersection curves of two canal surfaces with quadric decomposition",
Lecture Notes in Computer Science, Vol. 3992, pp. 342-349, 2006.
P40 K. Tang, Charlie Wang, and Danny Z.
Chen, "Minimum area convex packing of two convex polygons",
International Journal of Computational Geometry and Applications, Vol.
16, No. 1, pp. 41-74, Feb. 2006.
P39 Charlie Wang and K. Tang, "Non-self-overlapping Hermite
interpolation mapping: a practical solution for structured quadrilateral
meshing", Computer-Aided Design, 37/2, pp.
271-283, 2005.
P38 K. Tang and Yong-jin Liu, "An optimization algorithm for
free-form surface partitioning based on weighted Gaussian images",
Graphical Models, Vol 67/1, pp. 17-42, 2005.
P37 K. Tang and Charlie Wang, "Modeling developable folds on
a strip", ASME Journal of Computing and Information
Science in Engineering, Vol. 5, No. 1, pp. 35-47, 2005.
P36 Charlie Wang, Kai Tang, Benjamin
Yeung, "Freeform surface flattening
based on fitting a woven mesh model",
Computer-Aided Design, 37/8, pp. 799-814, 2005.
P35 J. Fu, Ajay Joneja, and K. Tang, Modeling wrinkles on smooth
surfaces for footwear design,
Computer-Aided Design, 37/8, pp. 815-823, 2005.
P34 Yong-Jin Liu, K. Tang, Ajay Joneja,
"2D sketch-based shape modeling
with a fast and stable numerical engine", Computers
& Graphics, Vol. 29, pp. 778-793, 2005.
P33 K. Tang, "Geometric optimization
algorithms in manufacturing", Computer-Aided Design
& Applications, Vol. 2, No. 6, pp. 747-758, 2005.
P32 Charlie Wang and K. Tang, "Developable triangulation of a strip",
Computer-Aided Design & Applications, Vol. 2, No. 1-4, pp. 233-242,
2005.
P31 Jinyuan Jia, Ajay Joneja, K. Tang,
"Revolute Quadric Decomposition
of Canal Surfaces and Its Applications", Lecture
Notes in Computer Science, Vol. 3515, pp. 298-305, 2005.
P30 Charlie Wang and, K. Tang,
"Optimal boundary
triangulations of an interpolating ruled surface", ASME
Journal of Computing and Information Science in Engineering, Vol. 5, No. 4,
pp. 291-301, 2005.
P29 Yong-Jin Liu, K. Tang, Ajay Joneja,
and Matthew Yuen, "Multiresolution free form object modeling with
semi-regular mesh reconstruction from unstructured point cloud, International
Journal
of Image and Graphics, Vol. 5, No. 4, pp. 765-787, 2005.
P28 Yong-Jin Liu, K. Tang, Matthew Yuen, "Multiresolution free form object modeling with point
sampled geometry", International journal of computer science
and Technology, Vol. 19, No. 5, pp. 607-617, 2004.
P27 Charlie Wang and K. Tang, "Non-self-overlapping algebraic
grid generation on an n-sided surface", International
Journal of Numerical Methods in Fluids, Vol. 46, No. 9, pp. 961-982, Sept.
2004.
P26 Charlie Wang and K. Tang, "Achieving developability of a
polygonal surface by minimum deformation: a study of global and local
optimization approaches", Visual Computer, Vol.
20, No. 8-9, pp. 521-539, 2004.
P25 Benjamin Yeung, Kai Tang, and Charlie
Wang, "Fitting a woven fabric model onto a surface based on energy
minimization", Computer-Aided Design & Applications, Vol. 1,
pp. 197-206, 2004.
P24 J. Fu, Ajay Joneja, and K. Tang,
Modeling wrinkles on smooth surfaces for footwear design, Computer-Aided
Design & Applications, Vol. 1, pp. 311-320, 2004.
P23 Jinyuan Jia, K. Tang, Ajay Joneja,
"Bi-conic subdivision of
surfaces of revolution and its applications in intersection problems",
Visual Computer, Vol. 20, No. 7, pp. 457-478, 2004.
P22 K. Tang and Yong-jin Liu, "A geometric method for
determining intersection relations", IEEE Trans. on
Robotics, Vol.20, No. 4, pp. 636-650, Aug. 2004.
P21 Charlie Wang and K. Tang, "Algebraic grid generation on
trimmed surface using non-self-overlapping Coons patch mapping",
International Journal of Numerical Methods for Engineering, 60/7, pp.
1259-1286, June, 2004.
P20 Guojin Wang, K. Tang, and Chiew-Lan
Tai, "Parametric representation of a
surface pencil with a common spatial geodesic", Computer-Aided
Design, 36/5, pp. 447-459, 2004.
P19 Charlie Wang, Y. Wang, K. Tang,
and Matthew Yuen, "Reducing the stretch in
surface flattening by cutting paths", Computer-Aided
Design, 36/8, pp. 665-677, 2004.
P18 J. Jia, K. Tang, and K.W. Kwok,
"A novel algorithm of computing intersection curves of two surfaces of
revolution", in Geometric Modeling: Techniques, Applications, Systems
and Tools, Kluwer Academic Publisher, pp.
80-93, ISBN:1-4020-1817-7, 2004.
P17 Yong-Jin Liu, Matthew Yuen, K. Tang, "Manifold-guaranteed
out-of-core simplification of large meshes", Visual
Computer, Vol. 19, Issues 7-8, pp. 565-580, Dec. 2003.
P16 K. Tang and Yong-jin Liu, "Maximal intersection of
spherical polygons by an arc and its application to 4-axis NC machining",
Computer-Aided Design, 35/14, pp. 1269-1285, 2003.
P15 K. Tang and Ajay Joneja, "Traversing the machining
graph of a pocket", Computer-Aided Design, 35/11,
pp. 1023-1040, 2003.
P14 K. Tang and K. Pang, "Optimal connections of loops
in LOM", Computer-Aided Design, 35/11, pp.
1011-1022, 2003.
P13 K. Tang, "On minimum traceable
partitioning and minimization of tool retractions", Computer-Aided
Design, 32/10, pp.621-624, 2000.
P12 K. Tang, S. Chou, L. Chen, and T.
Woo, "Tetrahedral Mesh Generation
for Solids based on Alternating Sum of Volumes", Computers
in Industry, 41/1, pp. 65-81, Jan. 2000.
P11 K. Tang, "On computing contact
configurations of a curved chain", Graphical Models and Image
Processing, Vol. 61, No. 6, Nov. 1999, pp. 341-361.
P10 K. Tang, S. Chou and L. Chen, "An Algorithm for Reducing Tool
Retractions in Zigzag Pocket Machining", Computer-Aided
Design, 30/2, 1998.
P9 K. Tang, S. Chou, and L. Chen,
"Optimal Workpiece Setups for 4-axis NC Machining",
Computers in Industry, 37/1, pp. 27-41, June 1998.
P8 K. Tang, M. Wang, L. Chen, S. Chou, T. Woo and R.
Janardan, "Computing Planar swept
Polygons Under Translation", Computer-Aided Design,
29/12, 1997.
P7 K.
Tang and Yakove Dayan, "Offsetting surface boundaries
and 3-axis gouge-free surface machining", Computer-Aided
Design, 27/12, 1995.
P6 J. Gan, T. Woo, and K. Tang, "Spherical maps: their
construction, properties and approximation", ASME
Journal of Mechanical Design, Vol. 116, No. 2, 1994.
P5 T. Woo, S. Chou, L. Chen, K. Tang,
and S. Shin, "Scallop hull and its offset",
Computer-Aided Design, 26/7, 1994.
P4 K. Tang, T. Woo, and J. Gan, "Maximum Intersection of
spherical polygons and workpiece orientation in 4-axis machining",
ASME Journal of Mechanical Design, Vol. 114, No. 3, 1992.
P3 K. Tang and T. Woo, "Algorithmic aspects of
Alternating Sum of Volumes: Part II. Non-convergence and its Remedy",
Computer-Aided Design, 23/6, 1991.
P2 K. Tang and T. Woo, "Algorithmic aspects of
Alternating Sum of Volumes: Part I. Data Structure and Difference Operation",
Computer-Aided Design, 23/5, 1991.
P1 K. Tang, "On the intersection of a set
of directional cones", Computer Vision, Graphics, and
Image Processing, Vol. 45, March 1989.
Representative
Referred Conference Papers
C13
"Boundary conformed tool path
generation based on global reparameterization", CAD/Graphics 2015, Xi'an,
Aug. 2015.
C12
"An energy saving approach for rough
milling tool path planning", CAD'15, London, June 2015.
C11 "A Jumping Robot Using Soft
Pneumatic Actuator", Proceedings of 2015 IEEE International
Conference on Robotics and Automation,
May 26-30, 2015, Washington State, Convention Center, Seattle, Washington (ICRA
2015).
C10 "Design of developable strips",
CAD'11, Taipei, Taiwan, June 27-30, 2011.
C9
"Efficient Boolean Operations on
Manifold Mesh Surfaces", CAD'10, Dubai, UAE, June 21-25, 2010.
C8
"Stabbing Convex Polygons with
a Segment or a Polygon", Proceedings of the
16th Annual European Symposium on Algorithms, Karlsruhe, Germany, pp. 52-63, September 15-17, 2008.
C7 "Pattern Computation for Compression
Garment", Proceedings
of ACM Solid and Physical Modeling Symposium
(SPM), Stony Brook University, New York, pp. 203-211, June 2-4, 2008.
C6 "An Efficient Implementation of RBF-Based
Progressive Point-Sampled Geometry", Proceedings of Geometric Modeling
and Processing, Pittsburgh, PA, USA, pp. 637-643, July 26-28, 2006.
C5 "Computing planar sections of surfaces
of revolution with revolute quadric decomposition", Proceedings of
Shape Modeling and Applications (SMI), Genova, Italy, pp 77-86, June 7-9,
2004.
C4 "Developability-preserved free-form
deformation of assembled patches", Proceedings of ACM Symposium on
Solid Modeling and Applications, Genova, Italy, pp 231-236, June 9-11,
2004.
C3 "Efficient numerical algorithms on
equilibrium equations for geometric modeling", Proceedings of Geometric
Modeling and Processing, Beijing, China, pp 291-300, April 13-15, 2004.
C2 "Modeling wrinkles on smooth surfaces
for footwear design", CAD'04, Pattaya Beach, Thailand, May 24-28,
2004.
C1 "Fitting a cloth model onto a surface
based on energy minimization", CAD'04, Pattaya Beach, Thailand, May
24-28, 2004.